Welcome to Chemyx! Get familiar with programming Chemyx syringe pumps. Easy for beginners and experts to get started quickly.
-
Terminal Commands
Commands can be entered to set parameters or control the pump -
MATLAB
Command line and GUI programs for beginners and experts -
LabVIEW
Programs to help you customize and write Labview VI’s -
Python
Starter Python program with source code.
Getting Started
Chemyx produces some of the industry’s finest syringe pumps. To hasten the product's use, we provide LabVIEW and MATLAB APIs to the customer. This guide will walk you through communicating with the syringe pump from installing the hardware and software to sending commands and running the pump.
What you will need
- Chemyx syringe pump
- RS232 DB9 straight through cable or RS232 DB9 to USB cable
- Power cord
- Power adapter is needed for OEM module.
Connectivity Options
The table below describes the connectivity options for each pumps
Model | USB-B | RS232 | TTL |
---|---|---|---|
Fusion 100 | |||
Fusion 200 | |||
Nanojet | |||
Fusion 4000 | |||
Fusion 6000 | |||
OEM Module |