Chemyx Stainless Steel Syringes & Fittings

Chemyx has five different sizes of stainless-steel syringes. 6 ml, 20 ml, 50 ml, 100 ml and 200 ml.  All of them have a 1/8 inch FNPT thread at the end as shown in the picture:

Chemyx high-pressure, stainless-steel syringes do not come with the connectors. Upon ordering your syringe pump please specify which fitting you will require.  We offer the following syringe connectors:

1/8, 1/16, 1/4 Swagelok

3mm, 6mm Metrick and Luer Lock

Please visit Fittings to choose your fittings.

Here is a stainless steel 1/8 inch MNPT adapter to 1/8 inch compression fitting as shown in the picture:

The fitting allows you to connect the 1/8 inch tubing to the syringe. A 1/8 MNPT adapter to 1/16 inch compression fitting for connecting 1/16 inch tubing, and 1/8 MNPT adapter to 1/4 inch compression fitting to connect 1/4 inch tubing. You can change the tubing fitting to other types of fittings as long as it has 1/8 MNPT at one end.

***IMPORTANT*** When unscrewing the fittings make sure to hold it (including the nut and body) upright to avoid dropping the back and front ferrule shown above.

    Have any questions or comments about this article? Fill out the form below and we'll get back to you as soon as possible!

    Privacy & Terms

    By choosing "I agree" below you agree to Chemyx Inc Terms of Service. You Also agree to our Privacy Policy, which describes how we process your information.