2.1. Experimental setup. The experiments were conducted in a 61 cm tall column of 8.2 cm square cross-section (Fig. 2). The base was sealed except for a 1.0 mm ...
A stock solution was prepared by suspending TiO2 nanoparticles (Titanium oxide, anatase, less than25 nm, 637253-50G, Sigma-Aldrich) in a solution of 4-(trifluoromethyl)...
Serial millisecond crystallography (SMX) using a syringe pump was performed on the microfocusing beamline 11C at Pohang Light Source II (Park et al., 2017). The ...
Microfluidic platform Flow synthesis of Mn-doped CsPbCl3 QDs was carried out in an automated modular microfluidic platform previously developed in our group. The assembly ...
The obtained TOCNF hydrogels were de-aired in a planetary centrifugal mixer (THINKY AR-250, JAPAN) and transferred to a syringe (Henke Sass Wolf, 60 mL, Luer ...
Experimental Setup (Microscale). Microfluidic continuous flow reactors consisted in stainless steel (SS) coils (1.58 mm o.d. x 500 μm i.d.) equipped with SS nuts, ...
Complete scheme of the perfusion system with the syringe pump, the PC and the pressure sensor with the reader. The camera is located inside ...
By choosing "I agree" below you agree to Chemyx Inc Terms of Service. You Also agree to our Privacy Policy, which describes how we process your information.