Watch this video to see how to use cycle mode for the Chemyx Fusion 4000, 4000-X, and 4000-X OEM syringe pumps.
Follow these steps:
1. Using the same syringe sizes, load your syringes.
2. Select “Cyle Mode”:
3. Set your parameters. The system will automatically set the same parameters (ID, Volume, and Rate) for both syringes. How To Measure ID Of Syringe & Manually Add-In The Syringe Pump
4. Press “Play”:
5. Press “Start Cycle Mode”:
6. Press “Stop” to Stop:
If you have any questions email us at info@chemyx.com