Follow these steps to control the delay time between infuse and withdraw in cycle mode for the Chemyx Fusion 4000 Multi-Channel Syringe Pump.
1. Go to the menu:
2. Press the following commands on the key pad to the right: . ⌫ 6 5 4
Note: the “⌫” is the bottom right of the keypad.
3. Change “Early Sec” New Value to zero: 0 (see red section below)
Note: smaller number will decrease the time and larger number will increase the time delay.
4. Exit by pressing the X in the top right corner of the screen.
