The Chemyx Fusion 6000 High-Pressure Syringe Pump has pressure suitable for any application. To use the pressure control settings on a high-pressure syringe pump, you would need to use the pump in conjunction with the Pressure Sensor. The Pressure Sensor will plug into the pump and a 3-way connector will connect the syringe and the Pressure Sensor. The maximum pressure is 2000 PSI. Pressure control will stop the pump once the target pressure is reached.
Pressure Sensor for Fusion 6000
The PV350 will plug into the pump and a 3-way connector will connect the syringe and the PV350. The maximum pressure is 500 PSI. Pressure control will stop the pump once the target pressure is reached.
